Extensions mount to the rear edge of the fan shroud filling the gap between the shroud & the fan blades to aid cooling. * COOL TIP * Although extension were usually only used on models with Air Conditioning, they can be mounted to non-AC models to aid cooling. | ||
Model | ||
-O | 66-67 327 AC FAN SHROUD EXTENSION authentic design match molded fiberglass smooth on both sides as original. | |
66-67 AC 427 & 68 427 FAN EXTENSION authentic design match molded fiberglass smooth on both sides as original. | ||
- | 66-68 EXTENSION 8 PIECE MOUNTING KIT with 2 indented hex washer head bolts, 2 flat & 2 lock washers & 2 U-nuts to mount the extension to the shroud. Does 1 car. | |
- | 68 327 with AC FAN SHROUD EXTENSIONS authentic design match molded fiberglass, smooth on both sides as original. SPECIFY: UPPER or LOWER | - |
68 327 AC FAN SHROUD UPPER EXTENSION | ||
68 327 AC FAN SHROUD LOWER EXTENSION | ||
69-73 350 AC FAN SHROUD EXTENSION Match molded fiberglass smooth on both sides as original. (Used with Fan Shroud # 1277140) | ||
- | 69-73 350 AC FAN SHROUD EXTENSION 3 PIECE MTG KIT Does 1 car. | |
- | 69-73 350 AC FAN SHROUD EXTENSION 3 PIECE T-NUT SET Does 1 car. | |
- | 69-74 427 & 454 FAN SHROUD EXTENSIONS Match molded fiberglass smooth on both sides as original. | - |
69-EARLY 73 SHROUD EXTENSION ( use with Fan Shroud part # 1277141 only) | ||
LATE 73-74 SHROUD EXTENSION ( use with Fan Shroud part # 1277145 only) | ||
- | 69-74 427/454 FAN SHROUD EXTENSION 3 PIECE MTG KIT Does 1 car. | |
- | 69-74 427/454 FAN SHROUD EXTENSION 3 PIECE T-NUT SET Does 1 car. | |
73-75 350 with AC SHROUD EXTENSION Match molded fiberglass smooth on both sides as original. (Used with Fan Shroud # 1277145) | ||
- | 73-75 350 FAN SHROUD EXTENSION 6 PIECE MTG KIT Does 1 car. | |
- | 73-75 350 FAN SHROUD EXTENSION 6 PIECE T-NUT SET Does 1 car. |
Dr REBUILD's | |
How to Install 66-68 Fan Shroud Extensions | |
Installation of some these fan shroud extensions may require drilling 3/32" to 5/64" mounting holes in the fans shroud and, or extension with a small hand drill. The 66-68 extensions mount with 6 evenly spaced tabs along the front edge, in addition to screws and U-nuts. These tabs require that 6 slots be cut into the rear lip of the shroud. The location of these slots is indicated by V-grooves found on the surface of the shroud. A small Dremel tool with a cutting blade works best for cutting these 5/32" wide by 2" long slots. Consult the 66-68 Assembly Instruction Manuals for further information. A little care and patience are another requirement for mounting these 66- 68 fan shroud extensions. | |
Additional PARTS... FAN SHROUD SEALS <> FAN SHROUD <> | |